Select Page

BULLS BALLS – 1st Generation (top hanger)


Install your balls in minutes, on your big rig or small vehicle. Order today and we’ll ship’em tomorrow. Show the world you’re nuts. Order your balls today.
*Mounting Hardware Sold Separately

SKU: BB1G Categories: ,



Styled after Jake 🙂 chersballs2bigballs

All of our Bulls Balls®Big Boy Nuts™ Truck Nutz™ and Biker Nutz™ are molded out of a Poly-pro-py-lene Co-polymer OR High-Density Polyethylene.  These tough materials make these balls as hard as a rock AND colored all the way through.   ( additional clear epoxy urethane processing for chrome and brass sets as well as our Designer Series of Camouflage Big Boy Nuts, Diamond Plate Big Boy Nuts™ and the New Carbon Fiber Nuts. )

BULLs BALLs® are very hard and extremely weather resistant.  Each set of our Bulls Balls weighs in around two pounds.  All of our products are colored through & through, should you ever drag your balls on anything, the color remains consistently the same color.

The Chrome and Brass Balls are made of the same materials, which are then vacuum metalized with the chrome or brass color added to a heavy, clear epoxy urethane.  The nuts are then air dried & sprayed again, then baked once more for the durable finish required.

The Diamond Plate and Camouflaged Nuts and Carbon Fiber Nuts are made of the same material, which is then applied with our unique patterns, then sprayed a coat of heavy, clear epoxy urethane.  The nuts are then air dried & sprayed again once more for the durable finish required.

Even with these tough requirements, once the Chrome, Brass and Designer Nuts are hung on your rig properly, there could be small nicks and such from flying rocks and other debris as you might imagine. There is NO Guarantee against this happening!


Size Does Matter!
We have the right sizes for your installations!

There are two major differences between the 1st Generation AND the 2nd Generationof Truck Balls developed by

The Original 2nd Generation Balls are 2″ shorter and have the hole through the side rather than front to back like the 1st Generation Balls. (top hanger type)

This 2nd Generation Balls * Ball-and-Chain™ Mounting System was designed primarily for ALL trucks (1/2, 3/4 and 1 tons) with the 2″ x 2″ hitch receiver tube on the truck. Simply wrap the chain around the hitch receiver tube, snug it up and lock it in place, then rotate the brass lock up on top out of sight. (no tools required)

The Chain and Lock System™ works well for other types of installations as well. Such as using the bottom mounted spare tire lug bolt holes. Plated Chain and Brass Lock included with ALL 2nd Generation Types of Bulls Balls and Big Boy Nuts.

This slightly shorter length also works well for vehicles OTHER than 1/2, 3/4 and 1-ton trucks, such as SUVs, cars, quads & bikes.

They are shorter and lighter, however, they have not lost the hefty, fullness of the Bulls Balls® and Big Boy Nuts.

Our 2nd Generation chain balls allow more ways to hang AND they remain swinging even when pulling a trailer, also this design prevents the negative look of flippity flopping of the nuts at higher speeds. They simply float nicely as the air pushes them gently up and back.

Also with the hanging chain and padlock ( included ), they are much more secure from impromptu theft. At least the bad guys have to bring a pair of “Bolt Cutters.”

Do NOT use wire ties, small bolts, picture hanging wire or other similar hanging devises like our imitators recommend. Theft is a problem!  Why make it easy for them?

Home of The Original
BULLs BALLs® Truck Nuts

Additional information


, , , , , , , , ,


Your Cart